“You are tough to buy for…”

My wife and I have a great relationship. We are a good pair of ‘parent partners’ when it comes to raising our boys. We share many of the same tastes in food, friends and keeping our home a pleasant place to live. There are times when we are right on the same wavelength, knowing when – say – it’s time to leave a party because someone thinks it would be cool to start dancing the Macarena.

The one time we seem to disconnect is when we are buying gifts for each other. I remember the time I bought her utility long underwear tops and bottoms – and gave them to her – on Christmas morning – in front of her parents – while we were just still dating.

I am an extreme dufus.

For many years, we would share the same lament whenever Mother’s Day or Father’s Day, our anniversary, the holidays or our birthdays would roll around. What am I going to get for my loving – and ever patient – spouse?

We got to the point where we now write down our gift ideas and slip them to each other. It’s been a good solution, and I’m currently working my way through her’s this holiday season. So far, so good.

But, it’s almost 2010! Pen and paper? So outdated. Besides, aren’t we all going paperless these days?

That’s why many retailers are getting savvy and putting together entire gift sites on their online stores. Every year, merchants are making it easier for those loved ones in your life to pick the right goodies for you.

EAGifts

“The whole reason we started our gift site,” said Tim Walter of Eagle America, “is that we know woodworkers throw themselves into their gift making this time of the year. We just wanted to make sure that you weren’t forgotten about, either.”

As with many other sites, the folks at Eagle America have combed through their entire catalog of offerings to select those handy, just-can’t-do-without items that woodworkers would love to see under the tree. “We put a focus on both essential items as well as some more fun woodworking accessories. After all, fun on Christmas morning shouldn’t just be for the kids, woodworkers deserve some too!”

The gift offerings are also broken into dollar range categories. “We understand that not everyone can afford to spend a lot this holiday season. That’s why we broke the categories down by amount. For instance, if you have kids and they are pooling their allowance to buy you something for the shop, we want to ensure they can find a high-quality tool well within their price range.”

And, for those who may have been extra-nice this year, “There are lots of fun ‘toys’ in there…you know what I mean, power tools! Who wouldn’t want a brand new Fein Multimaster under the tree?”

Of course, you can recommend your loved ones just browse by category, or you could select a few items and put them on your wish list. “Sometimes, you need a particular tool to help you develop your skills. Planting a few suggestions gives the gift-giver some guidance on what you are looking for and helps prevent them from giving you something that you may already have.”

While it may seem like it’s no longer a gift if you plant a few strong hints, remember, you may be helping your spouse, friends or relatives who might be sweating over choosing a gift for you this time of the year. “Besides,” asked Tim, “how many reindeer sweaters does one person REALLY need?”

Quick Poll

They are some of the most useful power tools in the shop.  Table saws can rip, crosscut and cut scads of different kinds of joints.

They can also represent a significant investment for the typical woodworker.  Many woodworkers have had to buy smaller, less capable saws and step up to beefier models.  Others may have inherited the well-used saws from friends or relatives.  Still other may own a larger saw for their shop and a smaller, more portable model for their field work.

However, it adds up, this week, we want to know how many table saws you have ever owned in your life. Be sure to count them all!

[poll id=”100″]

Link of the Week

Pyrography.net

Over the past dozen years, I have made plenty of mistakes while woodworking.  Usually, those miscut  pieces of wood end up in a friend’s chimenea, never to be seen again.

But, what if I told you that some woodworkers intentionally burn their projects as an art form?  This process, called pyrography, is a very popular craft that can produce some breathtaking images on wood or leather.

Through the careful application of a heated ‘pen’, the artist can control the intensity of the line, the amount of shading and even how deep the char from the tool travels into the wood.  The results can be spectacular, looking like a pen and ink or charcoal drawing.

Pyrography.net offers a primer on the process, reviews the tools you will need to do the craft, provides examples from other skilled artists and a host of additional information on the craft.

Tools I use: My fine hand saws

One of the most popular ‘family’ of shows on TV is the CSI franchise.  For some reason, people love to watch police crime scene investigators show up at some location, sift through the evidence and arrive at a conclusion of what happened.

There is no doubt in my mind that if they came to my house and investigated my choice of hand saws over the years, they would wonder what I was up to.  It’s a baffling collection of tools, but – I fear – it’s how many woodworkers have evolved their collection over years.

Let’s check the evidence we have on hand, shall we?

Here are the ‘fine cutting’ hand saws I have, in order of when I purchased them, with a brief analysis  about them.  Those with weak constitutions may want to turn away.

My uber cheap plastic Big Box back saw.  I would ask for a Mulligan on this one, except for the fact that the $12 I spent on it 13 years ago makes it not worth the effort.  This ‘saw’ came with a plastic miter box that cut ’45 degree’ angles and ‘square’ cuts on the end of boards.  I did use it for several years, but soon discovered that no, this was just not going to work.  I keep it with my fine cutting saws, but I’m not sure why.

My plastic big box ryoba.  This saw proved to be a step in the right direction, showing that at least my mind was moving up from where I had started.  Rip saw on one side and crosscut on the other, the blade is not supported by a back spine.  This means that technique is essential in order to get an accurate cut.  The only problem is that I’m really not set up in a traditional Japanese style shop where the proper technique is easy to learn and apply.  It gives me better cuts, and I will use it to roughly crosscut boards.  Interestingly enough, I had a saw similar to this one before I bought my table saw, and I used to do most of my rip cuts with it.  Fascinating….

The folding dozuki.  This saw is considerably better than the big box ones I have purchased over the years.  I bought it from Lee Valley tools and it does cut rapidly and accurately.  The steel spine runs along 3/4 of the back of the blade, giving me straighter cuts.  It’s not quite dovetail cutting quality, but I have cut some tenon cheeks and shoulders with it.  All in all, a great saw to put in the tool box, but not for precise joinery.

My ‘professional’ dozuki.  After wasting a ton of money on some older, nasty fine cutting hand saws, I finally wised up and dropped some ‘serious’ money ($75) on a high-quality dozuki.  Everyone I had asked about the saw raved about its accuracy and ability to make fine cuts.  And, this one FINALLY got me into the category of real fine cutting saws.  It cuts beautifully, but the problem I have is that with the ‘stick’ handle, I must not be gripping the saw the same way for every cut.  The blade will often wander, and I’m left shaking my head in frustration.  Practice does make perfect, and I really do need a ton more.

My Veritas dovetail saw.  Now, we’re talking.  I picked this baby up earlier this year, and wow.  It’s a western-style push saw AND it has a handle that pretty much guarantees I’ll be gripping it the right way every time.  I love the cuts it makes and the accuracy.  The only knock on it is that the blade depth is just too small for all of the cuts I want to make with it.  I’m hoping the folks at Veritas will make a larger tenon saw in this pattern for folks who need a little more depth of cut.

What does the future hold?  Well, I do like these saws, and I wouldn’t mind getting my hands on a premium tenon saw.  Right now, however, these guys are the ones I turn to in order to get the job done right.

Case closed.

Be a happy elf…

This past weekend proved to be one of the most productive I have ever experienced in the shop.  There’s nothing quite like getting holiday gifts built for loved ones.  You know they will appreciate the gesture and proudly exhibit the item you build for years to come.  Yes, as an elf at the North Pole, I was totally stoked!

Send your own ElfYourself eCards

Unfortunately, once word gets around that you are a skilled woodworker… well… the jig is up.  Requests start to come in.  “Oh, you don’t have to buy me anything… something from the shop would be awesome!”

This year, I have now moved up to building ten copies of a project I found in the pages of Wood Magazine.  I can’t show you what they look like all put together, because I don’t want to ruin the surprise for the recipients.

However, I can take you behind the scenes into Santa’s workshop to show you how those elves are busting butt to meet the production deadlines.

Let’s just say that power tools are the workhorses for these projects.  I could easily do the work with hand tools and bang out high quality pieces, but for accuracy, speed and repetition, power’s got it hands down.

OK, some quick math….  since I’m working on a factor of ten, the number of pieces I had to cut includes:

  • 40 uprights
  • 40 rails
  • 40 long rests
  • 20 feet

For joinery for these pieces, I then had to  cut:

  • 80 mortises
  • 80 tenons
  • 80 notches

Needless to say, all of these joinery cuts have to be very precise, since they should all be interchangeable between different assemblies.  I relied heavily on stops, jigs and sleds to get the right set ups for each operation.  Sure, it took some time to get set up to a high degree of accuracy, but once I was there, things sped along.

After about seven hours in the shop over two days this weekend, I managed to have all of the pieces cut to size, all of the joinery cut and the central frames glued up.  From here, there’s more shaping to do on other elements and the final assembly.  Perfecting the sanding will follow, and then the entire project will be capped off by a lovely finish.

I’m hoping that all of the pieces which have to ship to the family will be ready to fly by Thanksgiving week, and then I can get the shop back for a few fun projects that are coming along afterward.

Right now, however, Santa’s little elf has had it…  he’s beat and could use a nap to recover from a long stint in the shop.  Visions of sugar plums – and hitting the shipping deadlines – are dancing in his head for sure.

Quick Poll

Today is November 15…

That means the holidays are very close.  Maybe not as close as the kids (or the young at heart) would like, but we getting close to the ever dreaded shipping deadlines.  If your holiday gift giving list is as long as mine, well, you are going to have to plan in some time to get them all built!

So, in this week’s poll, what’s the current status of building your holiday gifts?  Are you done, or have you even started?

[poll id=”99″]

Link of the Week

Build your own end-grain cutting board

Thanksgiving is coming here in the United States, and the rest of the holiday season is following quickly behind.  And, we all know what that means…

Family feasts!

If you want to help guarantee your feast is one to remember, you have to make sure that the cook has all the right tools at his or her her disposal.  One of the most essential is a solid cutting board for all the chopping, mincing and dicing that goes into the food prep.

The Wood Whisperer himself, Marc Spagnuolo, has an excellent plan for making a classic end-grain butcher block cutting board, complete with an instructional video.  From wood selection all the way to final finishing, Marc shows the way to building a stylish and useful tool for the family chef.

Who knows… if you build one, you may have earned an extra slice of the roast beast.

part of the Wood Talk Online community