What was under the tree?

Between trips to the doctor this past week, there also happened to be this little event called Christmas. Well, Christmas Eve and Christmas Day, both of which were celebrated with much mirth and merriment… and food. Glorious food.

I must have been a good shop monkey this year, because Santa left some choice items for me under the tree this year. There was quite the haul for the entire family, with the kids getting lots of gift cards (what else would two teenage boys want?), Rhonda getting a few nice things (an extra kayak paddle for those awesome beach days) and I got a few totally awesome things as well.

Martha B. Day, baby

First, I mean, come on. This shirt is totally the bomb. You may have never heard of Martha B. Day school, but my brothers and I sure have – that was our elementary school back in Bloomingdale, New Jersey. I had seen this shirt online during a school fundraiser, and I just thought it was too funny to pass up. Granted, I haven’t been inside the building since June of 1980, but it’s good to get some strange looks from folks as they pass.

The Leatherman

This little beauty is something I will be using a lot. Just before the holidays, my son Dominic needed a multitool, and I gave him my old Husky one I had picked up at Home Depot. It served me well for years, but it was time for me to upgrade to a genuine Leatherman. This is one of the more entry-level models, but it has a ton of features which will serve me well for years to come.

Drill press and table

I already put that Leatherman to good use when I assembled the big present… my brand new Woodpecker drill press table. Once I moved my little drill press into its new home on top of its rolling stand, I have found myself using it a ton more than I had expected to. The only thing holding me back from using it more was the simple plywood table I had bolted to the press years ago. No slots, no fence… just a larger place to work on.

Rhonda picked this gem up from my friends over at Infinity Tools. After I had hinted that I wanted to improve the work-holding options on the drill press, she checked out their site to see what they offered. A blog post they had written a few months ago showed the features on the table, which convinced her this would be the right one for my shop.

Just as the father in A Christmas Story hid Ralphie’s Red Ryder Air Rifle behind his desk, Rhonda has snuck the large table into the house and hid it under the banquette until all of the other presents had been opened. That was some kind of surprise.

Woodpecker's Famous Red Tracks

Before we went off to our Christmas Day celebration at Rhonda’s sister’s house, I spent the morning assembling the table and getting everything ready for installation. The red anodized aluminum tracks were easy to install, and the fence bolts fit right into the slots, providing me a great guide surface for accurate drilling. A pair of flip-up stops will make drilling mortises a piece of cake, and a pair of hold down clamps will help keep the work secure, ensuring precision and safety.

Insert

The folks at Woodpecker even included a replaceable insert for when I chew up the original. How very thoughtful.

Now, I feel as if I can fully welcome the drill press into the arsenal of shop tools, taking its rightful place next to the other tools that help me get my work done.

And, with my sinus headache fading into memory, I just might get started on a new project for the living room. But, that’s another post for another day.

 

Quick Poll

While the holiday season so far has been great, the one thing that could have definitely been improved for this time off is if I could get rid of this totally awful sinus infection. I’m on my second course of antibiotics, heavy duty steroids to reduce the inflammation and a whole bunch of Advil. Bleh….

That's one sick monkeyEven though I have been feeling crappy, I have been able to spend a little time in the shop doing some maintenance and playing with a few toys that Santa brought.

For today’s quick poll – have you ever done any woodworking when you were sick?


 

Iggy’s Holiday Wish

‘Twas a few days before Christmas, and this monkey was fine.
Tom was about to just bore you, so I asked for some time.

You see, he’s been distracted, spending long hours at work.
So I figured I’d be nice and not such a jerk.

So, here I was, working on my poetry
In the time of the year that – in Florida – isn’t quite wintry.

The messy shop

Out in the shop the place was a mess.
With shavings and sawdust, something I’d need to address.

With a scratch of my nose and a wink of my eye
Brooms and vacuums at work, time started to fly.

The shop was all cleaned, yet little time had really passed.
I did a deep cleaning, not something half… uhhh… (well, you know!)

And, now it is neat

With everything neat and back in it’s place,
The shop looked quite pleasant, not an ugly disgrace.

And, in the vice chops, cranked tight, not too loose
Some boughs that were harvested from the trunk of a spruce.

Spruce boughs

Now these should fill the shop with a lovely aroma
Which should bring Christmas cheer to Tom and his senora.

After the cleaning the shop, but before I retired
I looked at Tom’s gift list – in projects he was mired.

“I can build these things,” I confidently proclaimed.
“But I’ll have to step on it, it’s the 22nd!” I exclaimed.

So I check the project status, and to work I did hurry
For some parts of the project, I just did have to scurry.

I felt like I was at the North Pole, a right hairy elf,
“If these things are going to get done, I’ll have to do them myself!”

WIne holder

Now, one project I had finished, it was a heck of a job
I decided it would be given to Tom’s friends Pam and to Bob

The wine caddy I’d built to sit on top of a bottle.
I’d finished it quickly, working at full throttle.

It looked so majestic, of mahogany and maple.
On top of the bottle, why, it almost looked Papal.

And when presented to the couple, they were both very surprised.
They thought it was Tom’s work, and couldn’t believe their eyes.

Surprise!

They fell in love with it, but had one rebuke,
“This work is too fine to have come from the Mook.”

That’s when I swung into the room and asked them to heed.
“It wasn’t from Tom, the builder was me!”

With a bottle of red (That is Bob’s favorite quaff)
I bid them both a Merry Christmas, bowed and my hat I did doff.

After bidding farewell to Bob and to Pam
I snooped around the tree to check out Tom’s latest scam.

The tree!There were presents galore for the kids and his wife
But I couldn’t see any for his favorite monkey for life.

I guess the best part is any tools he does receive
I’ll see out in the workshop – and straight to my mitts, I believe.

So I looked for the big boy to check his gift list.
But, I couldn’t find him – I was about to get miffed!

I looked ’round the house, looked both high and down low
But, knew not where it was, I was not sure where he’d go.

When, at last there was but one place to check.
It was his bedchamber, I said, “What the heck?”

But, from inside the room, there was what sounded like a bear.
My feet they did pause, protesting, “We’re not going in there!”

But, I screwed up my courage, and walked into the room.
My palms they where sweaty, my heart it did boom.

Visions of sugarplums...

But my fears were unfounded, the room was quite safe
Because it was Tom, with a grin on his face.

He was fully reclined, deep deep in his slumber.
His snores were so loud, they shook all the lumber.

While he is very funny, I know he’s no fool.
He was actively dreaming about getting some tools.

So, I backed from the room to give him time to rest.
When he’s fully rested, that’s when he does the best.

I’ll tell you this now, I’m not foolhardy
You can count on no post this coming Wednesday.

Because his kids are up early on a Christmas morning
With his family he’ll be, his blog duties he’ll be shunning.

I’ll pass word from Tom, and this comes from his heart
Merry Christmas to all, have fun you must start!

 

Quick Poll

There are lots of Christmas songs out there. Many are the oldies, such as Bing Crosby singing Silent Night. Or, maybe Eartha Kitt singing Santa Baby. Or the Mormon Tabernacle Choir singing O Holy Night. 

Bruce, now with Santa Claus is coming to townBut, because I’m originally from New Jersey, my mind keeps coming back to Bruce Springsteen, and his timeless rendition of Santa Claus is Coming to Town.


And, whenever I get to the point where Bruce asks Clarence Clemons if he has been practicing hard, so Santa will bring him a new saxophone, I always stop and think to myself, “Have I been practicing hard at woodworking, so Santa will bring me some new tools?”  That’s when I run back to the shop to get more practice. I mean, I’m not going to take any chances.

The big guy is coming to town!

What about you?  Have you all been good this year, so Santa will bring you a new router or set of chisels?  Answer honestly, because he knows if you’ve been bad or good (So, be good for goodness sake!)


 

Link of the week

Wooden Classic Wheels

So, imagine you like heavy construction equipment. Or old cars. Or classic pickup trucks.  And, you like woodworking.

If this is the case, today’s link of the week is the site for you.

A replica 1918 Ford Halack

Wooden Classic Wheels is a company owned by William Jackson of Del Motte, Indiana. He hand crafts each of these exquisitely detailed vehicles from hardwoods, and the collection includes far more than just your basic trucks. How about a well drilling rig? Maybe a concrete pumper? Steam locomotives?

He’s got ’em. Spend a few minutes checking out his site, and you will be amazed…

 

Species Spotlight: Spanish Cedar

Across Tampa Bay from where I live is the city of Tampa. And, inside the city’s borders, there’s an old part of town called Ybor City, where the Cuban cigar rollers plied their trade, making Tampa America’s cigar city.

On the main drag of that city the Columbia Restaurant. Established in 1905, they serve some of the most delicious Spanish and Cuban food you can find anywhere. The atmosphere is absolutely lush, with fountains, intricately painted tile and the scent of hand-rolled cigars being smoked over at the bar.

The Columbia's famous interior courtyard

The restaurant also features flamenco dancers from time to time. This exuberant – and loud – dance style features elegantly-dressed ladies, handsome gentlemen and the staccato sounds of a flamenco guitar played by an experienced musician.  Many of these guitars have a neck made of Spanish Cedar, today’s spotlighted species.

Spanish cedar is a native tree to Mexico, Central America and the Caribbean. The trees can grow up to 100 feet in height, and thrive in well-drained soils.The wood has a fair resistance to rot and insects, which makes it very desirable in the tropics, where these are a very big concern.

Spanish Cedar

The wood can range in color from light brown to a pinkish-red brown. It is very soft and easy to work with. It has a tendency to splinter, so the key are sharp tools.  It does have the occasional pitch pocket, which continually ooze resin, so if you don’t plan on sealing the wood, it’s a good idea to try to avoid those areas when selecting your pieces.

Spanish Cedar cigar trays

While it may be called Spanish cedar, it’s not a true cedar – closer, instead, to mahoganies. What’s really wild, however, is that it does have the smell of cedars, making it an excellent choice for chests and to line storage boxes for another big product of Ybor City, cigars. In fact, while many humidors may be built on the outside with a variety of different woods, most of them are lined with Spanish cedar to enhance the flavor of the cigars stored within.

Spanish Cedar guitar neck

While it’s obviously not finished when inside of a humidor, Spanish Cedar does take a great finish. The perfect way to view this is to check out the necks of most classical or flamenco guitars. They are traditionally made of Spanish cedar, and can take a mirror finish.

Reading these descriptions may make you think that Spanish Cedar is only good for small projects. It does well as larger furniture also, making beautiful benches, tables and other projects.

A beautiful Spanish Cedar bench by the Museum and Library Furniture company

So, they next time you smell a fine cigar being smoked or hear the energetic sounds of a flamenco guitar, be sure to applaud the work that Spanish Cedar does in bringing that to you.

What’s coming up?

This is always the best time of the year. The holidays are coming up fast, people are feeling pretty darned good, and we’re getting ready to ring in 2014. And, just as with this year, there are some big events coming up that you should be putting on your calendar.

A great shot from last year’s Folk Festival

First. on January 25, the St. Petersburg Woodcrafter’s Guild is going to be working over at Heritage Village, Pinellas County’s historical park for the annual Folk Festival. We have been there in the past, doing some woodworking demonstrations, But, this year, we are looking to build a workbench for Heritage Village to use for future demonstrations.

We are going to try to build – in one day – a Nicholson bench sort of like the one that I built for my shop. Since the guild has a number of talented hand tool woodworkers, we’re looking to do this without power tools. OK, I may do some initial planing and sizing on the power tools in my shop, but the main work will be done on site. We have already secured a donation from Lee Valley Tools for a face vise, we are looking for a donation for the wood, and we are working with the village’s blacksmiths to get some custom forged holdfasts made.

I am also trying to figure out how to live broadcast this event. So far, it looks like I can use UStream to do this from my iPad, but we’ll have to make sure that it works down at the park. If anyone else has any good ideas, I’m all ears.

That same day, my friend Chris Wong of Flair Woodworks will be holding a shop stool build along. Tired of plain-Jane store bought shop stool by his bench, he will be leading an online build-along on Saturday, January 25. If you would like to join in on the fun (this does sound like a total blast), be sure to check out his link.

This is not the first time Chris has conducted a build-along. Just 11 months ago, he and Scott Meek held a scrub plane build along, which was pretty successful. I hope this becomes an annual event.

Get Woodworking Week 2014

And, as if that wasn’t enough, mark your calendars for the first full week of February, because I’m going to be hosting the 2014 edition of Get Woodworking Week.

For the past two years, we have gotten woodworkers off of the sideline and into the shop to try their hand at the craft, and we hope to continue the momentum as we move into 2014. There has been plenty of support for it, but this year, I think we need to step it up a notch. I think we need to get into some schools to talk with kids about woodworking. I’m cooking up some details on this, but I think that’s where our aim should be pointed. If we are going to get new folks into the craft, it’s time to break onto the scene.

So, strap on your shop aprons, ready your safety glasses and let’s get ready to make some serious sawdust in 2014.

part of the Wood Talk Online community